METAL SOLUTIONS

EOS CopperAlloy CuCrZr

Material Data Sheet

EOS CopperAlloy CuCrZr

EOS CopperAlloy CuCrZr has a favorable combination of electrical and thermal conductivity accompanied with good mechanical properties. This alloy reaches its good properties during heat treatment.

MAIN CHARACTERISTICS

  • High productivity 12 mm3 /s with 80 µm layer thickness
  • Moderate to high conductivity in heat treated condition together with good mechanical properties
  • Chemical composition corresponds to C18150 and CW106C

TYPICAL APPLICATIONS

  • Rocket engine parts
  • Heat exchangers
  • Induction coils

The EOS Quality Triangle

EOS uses an approach that is unique in the AM industry, taking each of the three central technical elements of the production process into account: the system, the material and the process. The data resulting from each combination is assigned a Technology Readiness Level (TRL) which makes the expected performance and production capability of the solution transparent.

EOS incorporates these TRLs into the following two categories:
 
  • Premium products (TRL 7-9): offer highly validated data, proven capability and reproducible part properties. 
  • Core products (TRL 3 and 5): enable early customer access to newest technology still under development and are therefore less mature with less data.

All of the data stated in this material data sheet is produced according to EOS Quality Management System and international standards

POWDER PROPERTIES

Powder Chemical Composition (wt.-%)

Element Min. Max.
Cu Balance
Cr 0.45 1.15
Zr 0.05 0.25
Fe - 0.08
Si - 0.01

Powder Particle Size

GENERIC PARTICLE SIZE DISTRIBUTION 15 - 45 μm

HEAT TREATMENT

Description

CuCrZr can be heat treated to reach different mechanical properties and conductivity values.

Steps

1. Hold 30 min at ~ 980 °C in argon atmosphere, water cooling to room temperature.

2. Hold 3 h at ~ 430 °C in argon atmosphere, slow cooling in argon by taking the samples out of the furnace and rest in air.

Generate und open PDF